Short answer: most distribution owners should start with the NAW Executive Summit, the CEO-level meeting for all lines of trade, and then their own line of trade's meeting: HARDI for HVACR, ASA NETWORK for plumbing and PVF, NAED for electrical, PTDA and ISA for industrial, HIDA for medical products, and the fastener shows for fastener distributors.
This guide is for owners of distribution and wholesale companies, from building and construction supply to industrial, MRO, medical products and fasteners, especially those who may sell in the next one to three years. We picked meetings with an owner or executive audience and real business content, and we note where larger distributors, manufacturers or investors are also in the room. Every date links to the organizer's own page, so check there before you book travel.
| Show | When and where | Why an owner should go |
|---|---|---|
| NAW Executive Summit | January 19-21, 2027 Washington, DC | The CEO-level meeting for distributors across all lines of trade |
| HIDA Executive Conference | March 16-19, 2027 Austin area, TX | Owners and C-suite leaders in medical products distribution |
| ISA Annual Convention | April 21-23, 2027 Indianapolis | Industrial supply distributors and their supplier partners |
| NAED National Meeting | May 11-13, 2027 Salt Lake City | Senior executives in electrical distribution |
| Fastener Fair USA | May 19-20, 2027 Louisville | A fastener trade show for distributors, buyers and suppliers |
| PTDA Industry Summit | October 20-22, 2027 Orlando | Power transmission and motion control executives |
| NFDA Executive Summit | October 27-29, 2027 New Orleans | Fastener distributors' owner-level meeting |
| ASA NETWORK | November 10-12, 2027 Orlando | Leaders and CEOs in plumbing and PVF distribution |
| HARDI Annual Conference | December 6-9, 2027 Orlando | HVACR distribution leaders, with consolidation and succession on the agenda |
Heading to one of these? Know where your company stands before those conversations start, with a free, confidential valuation.
Cross-trade CEO conferences
NAW Executive Summit
January 19-21 at the Grand Hyatt Washington in Washington, DC. Details are on NAW's Executive Summit page.
The National Association of Wholesaler-Distributors holds the summit as its CEO-level meeting for leaders of distribution companies across all lines of trade.
Why go if you may sell: it is the one room where owners from every line of trade, larger distributors and the people who follow the industry meet at the CEO level. It is a good place to hear how the wider market sees distribution.
Building and construction supply conferences
HARDI Annual Conference
December 6-9 at the Orlando World Center Marriott in Orlando. Details are on HARDI's conference page.
Heating, Air-conditioning & Refrigeration Distributors International builds the conference for "C-Suites" and "Leadership & Management." Its own copy says "Consolidation is reshaping the landscape. New capital is accelerating change."
Why go if you may sell: HARDI puts consolidation and succession on the agenda directly, so HVACR distribution owners can hear how the market is changing from the people driving it.
ASA NETWORK
November 10-12 at Signia by Hilton Orlando Bonnet Creek. Details are on ASA's NETWORK page.
The American Supply Association calls NETWORK "The industry's premiere event for leaders and CEOs from wholesaler distributors, manufacturers, & manufacturers' representatives."
Why go if you may sell: it is the CEO-level room for plumbing, heating, cooling and PVF distribution, with the manufacturers and reps you work with in the same place.
NAED National Meeting
May 11-13 at The Grand America Hotel in Salt Lake City. Details are on NAED's National Meeting page.
The National Association of Electrical Distributors says the meeting is "Ideal for senior level and national account executives," with distributors, manufacturers and reps attending.
Why go if you may sell: it is electrical distribution's senior room, where owners meet the manufacturer partners whose support matters in any change of ownership.
Industrial, MRO and medical distribution conferences
PTDA Industry Summit
October 20-22 at Rosen Shingle Creek in Orlando. Details are on PTDA's Industry Summit page.
The Power Transmission Distributors Association says the summit "Connects senior executives and decision makers" and calls it the "largest annual gathering of PT/MC leaders," meaning power transmission and motion control.
Why go if you may sell: distributors and manufacturers in the channel meet at the executive level, which makes it a good read on where the channel is heading.
ISA Annual Convention
April 21-23 at the JW Marriott and Indiana Convention Center in Indianapolis. Details are on ISA's upcoming events page.
The Industrial Supply Association's convention brings together industrial supply distributors and their supplier partners across tools, fasteners, safety and MRO products.
Why go if you may sell: it is a peer room for industrial and MRO distributors, with the suppliers whose line cards shape your business.
HIDA Executive Conference
March 16-19 in the Austin, Texas area. Details are on HIDA's conference page.
The Health Industry Distributors Association aims the conference at "Owners and C-suite leaders," along with sales, supply chain and category leaders from distributors, manufacturers and their partners.
Why go if you may sell: it is the executive room for medical products distribution, where owners meet the manufacturers and partners behind their business.
Fastener distribution shows
NFDA Executive Summit
October 27-29 at The Windsor Court in New Orleans. Details are on NFDA's site. NFDA's Annual Meeting starts June 15.
NFDA says its members range from "small family firms to large multinational corporations."
Why go if you may sell: it is an owner-level peer room for fastener distribution, where small and large distributors sit at the same table.
International Fastener Expo
September 30-October 1 at the Phoenix Convention Center, with a conference day on September 29. Details are on the International Fastener Expo site.
The expo draws distributors, importers, wholesalers, manufacturers and procurement teams, and opens with the International Fastener & Assembly Summit.
Why go if you may sell: it is the main gathering point of the US fastener channel, and the associations meet around it.
Fastener Fair USA
May 19-20 at the Kentucky International Convention Center in Louisville. Details are on Fastener Fair USA's show page.
The organizer lists "Distributors, mechanical and design engineers, purchasers, wholesalers and OEMs" among attendees.
Why go if you may sell: it is a compact trade show where you can see suppliers, customers and distributor peers in two days.
Also worth a look
- NAW Innovators Summit: September 13-15 at The Joseph in Nashville. NAW's second summit pairs distributor executives with startup founders, with a focus on digital and AI. NAW Innovators Summit
- STAFDA Annual Convention & Trade Show: November 14-16 at the Orange County Convention Center in Orlando. It is for members only, for specialty tool and fastener distributors and their suppliers. STAFDA conventions
- IFDA Solutions Conference: September 26-28 at the Kentucky International Convention Center in Louisville. It is for foodservice distribution, and attendance is limited to distributors, food manufacturers, exhibitors and approved guests. IFDA events
- AAPEX: November 2-4 in Las Vegas, for auto aftermarket distributors and suppliers. AAPEX
- MDM M&A Summit: a free, virtual event from Modern Distribution Management focused on distribution M&A. The next date has not been announced. Modern Distribution Management
Selling in the next 1–3 years? How to use these events
- Read up before you're in the room. Larger distributors, manufacturers and investors all attend the CEO meetings. If a sale is possible in the next few years, learn what's involved in selling your distribution business before those conversations start.
- Keep it quiet at the show. Word that you're selling can unsettle key suppliers, sales reps and major accounts. Keep early conversations general, and share financials only under an NDA.
- Listen for what buyers ask about. Customer concentration, supplier relationships, inventory and working capital come up in every buyer conversation. Compare your company with what buyers look for in distribution companies.
- Watch your supplier relationships. Your line card is part of what a buyer is paying for. Use the shows to strengthen relationships with the manufacturers that matter most, so they stay with the company after a change of ownership.
- Collect contacts, not commitments. Trade business cards freely. A conference shows you how the market thinks, but it won't produce a buyer or a price on its own. When you're ready, start with how to sell a distribution business.
Frequently asked questions
What is the NAW Executive Summit?
It is the National Association of Wholesaler-Distributors' annual CEO-level meeting for leaders of distribution companies across all lines of trade. The next summit is January 19-21 at the Grand Hyatt Washington in Washington, DC.
Which conferences do distribution acquirers and investors attend?
We found no in-person conference dedicated to distribution M&A. Owners meet larger distributors and investors in the CEO rooms: the NAW Executive Summit across all lines of trade, and line-of-trade meetings such as the HARDI Annual Conference, ASA NETWORK and the NAED National Meeting. Modern Distribution Management also runs a free virtual M&A summit, and its next date has not been announced.
What are the main fastener trade shows?
The International Fastener Expo is the main US fastener gathering, and it runs September 30-October 1 in Phoenix. Fastener Fair USA runs May 19-20 in Louisville. The NFDA Executive Summit, the National Fastener Distributors Association's owner-level meeting, runs October 27-29 in New Orleans.
Where is the International Fastener Expo now?
The International Fastener Expo is back at the Phoenix Convention Center, where the most recent expo was held. The 2027 expo runs September 30-October 1, with a conference day on September 29.
What is the HARDI conference?
HARDI's Annual Conference is the yearly meeting of Heating, Air-conditioning & Refrigeration Distributors International, built for C-suite and leadership teams in HVACR distribution. HARDI's own copy says consolidation is reshaping the industry, and the program covers succession. The next one is December 6-9 at the Orlando World Center Marriott.
Is STAFDA open to non-members?
No. STAFDA's Annual Convention & Trade Show is for members only, and manufacturer members must exhibit. The next one is November 14-16 at the Orange County Convention Center in Orlando.
Dates, cities and audiences come from each organizer's own pages. Organizers change dates, so confirm on their sites before you book.